As part of the new products offered on the Polish market, we offer Durelis chipboard. These boards are imported on customer’s special request and they are available in thicknesses of 10 to 22 mm and in sizes from 2440 to 2620, up to 6300 mm long.
Durelis chipboards are non sanded, water resistant chipboard with a very hard surface. It is characterized by high density and under high humidity it expands, extends and swells. This board also has a low formaldehyde emission (E1 class). We invite you to read the specifications of this board, which are available in our section "Specifications".
It is also worth noting that the Durelis boards should not have direct contact with water especially after installation. Moreover, during storaging, they should not have direct contact with the ground.
The use of Durelis chipboards:
► as part of the floor;
► as furniture walls;
► as part of the roof structures;
► as restorative element
► as a short-term formwork (about two days);
► may be used several times.
TECHNICAL DATA OF DURELIS BOARDS | |||||||
MEASURMENT UNIT | TECHNICAL VALUE | ||||||
Thickness EN 324-1 | mm | 10 | 12 | 15 | 18 | 19 | 22 |
Thickness EN 323 | Kg / m3 | 740 | 720 | 720 | 720 | 700 | 700 |
The flexural strength along the EN 310 | N/mm2 | 21,0 | 21,0 | 20,0 | 20,0 | 20,0 | 18,0 |
The flexural strength transverse to EN 310 | N/mm2 | 19,0 | 19,0 | 18,0 | 18,0 | 18,0 | 16,0 |
The modulus of elasticity statically along the EN 310 | N/mm2 | 2850 | 2850 | 3300 | 3200 | 3200 | 3100 |
The modulus of elasticity statically transversely EN 310 | N/mm2 | 2650 | 2650 | 3100 | 3000 | 3000 | 2900 |
The tensile strength EN 319 | N/mm2 | 1,00 | 0,90 | 0,85 | 0,80 | 0,80 | 0,75 |
Swelling after soaking/24h EN 317 | % | 7,0 | 6,5 | 5,5 | 5,0 | 5,0 | 5,0 |
Humidity wg.V313 wg.V313 EN 321 | N/mm2 | 0,50 | 0,40 | 0,35 | 0,34 | 0,34 | 0,30 |
Swelling of the test V313 EN 321 | % | 10,0 | 10,0 | 8,0 | 8,0 | 8,0 | 8,0 |
Humidity. EN 322 | % | 6-10 | 6-10 | 6-10 | 6-10 | 6-10 | 6-10 |